STRIPS ALL METALS
Without corroding any profits.
JEM STRIP 427 is a powerful, biodegradable formulation that safely strips
all
painted and powder coated metals including aluminum, zinc, magnesium, and titanium without corrosion. So instead of paying top dollar to send challenging jobs out, you can keep your stripping and your profits where they belong: in your own shop.
WORKS FAST
So your crew can work faster.
JEM STRIP 427 may be easy on the environment, but it's tough on paint. Just drop the job in the tank, agitate if desired, and in minutes you'll have a sparkling piece of metal. And because JEM STRIP 427 has no Phenyl odor, your crew can keep their focus where it belongs: on shipping as many parts per hour as your daily workload demands.
LASTS FOR YEARS
Cuts disposal fees by thousands.
With ordinary strippers, you start with a drum full of toxic chemicals and end up with a drum full of toxic (and slow-acting) gunk. Add the cost of chemical disposal fees over the course of a year, and you're looking at damage to your profits and the environment. Only JEM STRIP 427 comes with its own mineral oil seal to reduce evaporation and dragout while it protects
your crew from harmful odors. The result? With proper filtration and JEM ADDITIVE 425 one tank of JEM STRIP 427 lasts for years, and reduces chemical disposal fees to 1/6 of their former cost!
THE SECRET TO EXTENDED TANK LIFE
JEM ADDITIVE 425 is our exclusive formulation designed to boost the active ingredients in JEM STRIP 427, so you get the most out of every tank.
JEM ADDITIVE 425 replaces dragout and restores the ideal chemical balance, so a single tank of JEM STRIP 427 can last five years or longer!
JEM STRIP 427
JEM STRIP 427 is a powerful blend of chemicals which is unmatched in the paint stripping industry for strength, safety and environmental considerations. It rapidly strips both powder and liquid coatings. Jem Strip 427 has a proficient record of achievement which we would be glad to share with you.
Benefits:
- Contains no methylene chloride, phenyl, chromates or caustic.
- Effective on polyurethane, epoxies, polyamides, nylon, teflon and other commonly used liquid and powder coatings.
- Safe on Aluminum, Titanium, Magnesium, Stainless Steel and High Strength Steel.
- Additives available to replace drag out and evaporation.
- High flash mineral oil seal floats on top of stripper to reduce drag out, odor and evaporation.
- Stripper may be recycled. (Some states give recycling credit.)
- Rinse water may be discharged to industrial waste treatment system in most localities. (Consult local regulations.)
Uses:
JEM STRIP 427 is used full strength at temperatures between 1600 F and 1900 F. Mineral oil seal is supplied with the stripper. Strip time depends on coating type, thickness and cure time. Strip time may be decreased with mechanical agitation and by increasing temperature.
JEM STRIP 427 will not damage or remove previously applied conversion coatings.
A cold or hot water rinse is required after stripping.
Warning: Avoid water contamination of 427 to avoid metal corrosion.
| Appearance | Clear |
| Odor | Mild |
| pH | 11.4 |
| Flash Point | Over 300 degrees F (TCC) |
| Rinsibility | Complete |
| V.O.C. | Less than 90 gm/ltr |
| Vapor Pressure | <0.0001 mm Hg |
