|
It has to be understood that compressed air is a high cost energy
source. So there has to be a reason to use compressed air alternative
products. ANY amplification technology, when used properly can
get you excellent efficiencies. Because our compressed air products
are generally light weight, can be turned on and off rapidly (so
only used when necessary), and are low or no maintenance, their
efficient use overall contributes well to the overall productivity
of a production facility.
Optimization
Products General Brochure
To do this we offer two products for optimization:
|
 A
QUALITY ULTRASONIC LEAK DETECTOR
This device can be used to locate costly leaks
in your compressed air system. Eliminating compressed air
leaks can recover a tremendous amount of energy that can
be used to operate all types of nozzles, amplifiers and
vortex tubes with no added cost! Air savings means free
energy. An Ultrasonic Leak Detector (UDC) is typically a
hand-held device that is used to locate leaks by aiming
it in the direction of a suspected source of an air leak.
When a leak is present, then an audible tone can be heard
via the use of appropriate head-phones. The proper head
phone is very important as well as sensitivity in order
to distinguish air leaks from other phenomena which can
be miss-interpreted, and even made worse by potential false
displays form and LED or other type of display.
BEWARE OF CHEAP QUALITY
There is good quality and there is cheap quality.
Be very suspicious of low cost units because they may be
very limited in their use. Nex Flow offers a high quality
unit at an excellent price.
Learn
More
|
|
 A
DECENT FLOW CONTROL SYSTEM
All Nex Flow™ products are designed to
improve plant efficiency buy either reducing the compressed
air used while it is being used, or in some way to reduce
maintenance, or in another way to improve productivity.
But the nice thing about compressed air is that this energy
comes from "storage" and can be called upon only
when needed. The Nex Flow PLC Flow Control System (PLCFC)
provides this on demand control. It minimizes the use of
compressed air on any blow-off, cooling, conveying, drying
or static control system utilizing a photo electric sensor
to turn the air on and off as required.
MAKE SURE YOU KNOW WHAT YOU ARE GETTING
The Nex Flow™ PLC Flow Control System
is not some inexpensive simple box with a timer and low
cost sensor - it is far more.
Learn More
|
|
 AIR
FLOW METER
The X-Stream™ Air Flow Meter represents
a radical departure from conventional air flow meter designs,
providing easy installation, low cost and accurate of the
probes in the air stream.
The air flow meter clamps around a pipe with
its probes projecting into the pipe through drilled holes.
The low cost of the air flow meter makes it ideal for installation
at points throughout the air distribution system to track
valuable compressed air and assess system operation.
Learn More
|
|
 SOUND
LEVEL METER
X-Stream™ Sound Level Meter is used to
measure and monitor the sound level in all types of industrial
environments. Used for compressed air exhaust noise measurement
it can identify areas where costly and inefficient blow
off can be replaced by energy efficient Nex Flow™ blow
off products. In many instances, noise may be reduced by
amplification products as much as 10 dBA, to protect workers
from excessive and damaging noise levels and reduce energy
use.
Learn More
|
|
