|
The high speed F800 weigh batch controller is designed
to provide efficient production control functions in a wide
variety of applications. The panel-mount configuration uses
only 5.12" W x 8.15"H of panel real estate, which
offers maximum mounting flexibility.
As a batching controller the F 800 uses its high speed to
provide unmatched accuracy. The power supply can excite /
power up to four 350 ohm load cells (or eight 1000 ohm). Applications
can include: hopper scales, packing scales, multi-ingredient
batchers, bag filling, and others systems that require high
speed and accuracy. Strain gage sensors can be connected directly
to the F800. a 10V excitation voltage provides the power for
the strain gauges in your application.
Up to 100 coded groups of set point values can be preset in
the F 800. Each group can include the following information,
SP 1, SP 2, FINAL settings, Compensation CPS, OVER, UNDER,
and also an Auto Free Fall compensation selection. Set points
can operate in two separate modes, simple comparison, or sequential.
Finally the set points values have many functional modifiers
that can be selected to "fine tune" a system. Timers,
filters, start points, and start/stop signals are all available
for selection.
The bright VFD display is ideal for dim lit manufacturing
areas. A weight tracking screen with upper and lower limit
comparisons, and a small graphic filling representation is
an aid in the initial start up sequence and for the operator
who is system troubleshooting.
NTEP approved, the system accuracy (non-linearity) is 1 part
in 10,000 divisions (0.01% full scale) legal-for-trade, or
1:40,000 expanded resolution mode. Calibration is simple,
and special situations like system dead load (mounting plates,
hoppers, etc.) can be compensated for by a front panel entry.
The F800 accumulate function continuously updates material
throughput and provides a supervisor or operator with a quick
front panel summary of the total(s).
A standard serial communication protocol (SI/F) is included
in each instrument. By using the SI/F interface the F800 can
be matched with UNIPULSE remote displays, and statistical
printers. If more communication capabilities are needed then
a series of Optional Communication Packages are available.
These include: RS232, SI/F2, Analog outputs (0-10V or 4-20mA),
DeviceNet (ODVA approved), Compro Bus/D (OMRON), CC-Link (Mitsubishi),
RS485, and BCD (In or Out).
- VFD High Visibility Display
- HI/LO limits display
- 100 set points values
- 100 updates /sec.
Weigh
Batch Controller Unipulse Model F800
|
