| Process Specification |
| Pipe Diameter |
any pipe with sensor connection (see fitting ordering chart) |
| Measuring range |
-40°F...+257°F (with ambient temperature 0...140°F) |
| |
104°F...+194°F (with ambient temperature above 104°F) |
| Switching accuracy |
±0.09°F (0...176°F) |
| |
±2.7°F (outside of 0...176°F) |
| Repeatability |
0.4% |
| Fitting |
1/2" NPT |
| Housing material |
PC+20% glass fiber |
| Front panel foil |
Polyester |
| Sensor element |
Pt100 |
| Wetted parts |
SS, FPM (Viton) standard (EPDM option) |
| Electrical Specification |
| Voltage Supply |
12...30 VDC |
| Reversed polarity of DC |
protected |
| Transistor output |
NPN and PNP, open collector 5...30 VDC, 700 mA |
| or Relay output |
3A/250 VAC or 3A/30 VDC; programmable |
| Input external Setpoint |
4...20 mA |
| AS-Interface |
Field bus |
| Current consumption |
max. 80 mA (no Load) |
| Short circuit protection |
yes |
| Recommended max. |
328 ft. shielded, section 0.14...0.5 mm2 |
| cable length for voltage supply |
|
| Electrical Connections |
| EasyOn |
on request cable plug 2511 |
| Cable Plug |
DIN 43650A |
| Multipin |
5 pin, M12 |
| ASI Connection |
on request |
| Environmental Specifications |
| Fluid temperature max. |
+257F |
| Ambient temperature max. |
0...+140F |
| Fluid pressure max |
230 PSI (PN 16) |
| Type of Protection |
NEMA 4 (IP65) with connector plugged in |
| Standards (EMI) |
EN 50081-1, 50082-2, 61010-2 |
