Giant Industries Bentonite pumps, are used for transporting of the Bentonite fluid used in the stabilization of bore holes in horizontal boring applications. These pumps range from up to 18.5 GPM – 84.5 GPM and up to 1500 PSI. All of these pumps are made of cast Iron fluid ends with solid ceramic plungers provide long life. And the gear end construction of heavy-duty cast iron crankcase, glazed, hardened and ground crankshaft and aluminum-bronze bearings provide years of life. With a seal life of 300-400 hours you can expect Performance Under Pressure with Giant.

BP5256

Volume: Discharge Pressure: Speed: Inlet Pressure: Power Consumption: Plunger Diameter: Plunger Stroke: Crankshaft Diameter: Key Width: Shaft Rotation: Temperature of Pumped Fluids: Inlet Ports: Discharge Ports: Weight: Crankcase Oil Capacity: Fluid End Material:

Up to 18.5 GPM Up to 900 PSI Up to 570 RPM -4.35*-150PSI 12 HP 36mm 42mm 35mm 8mm Top of pulley towards manifold Up to 104°F (2) 1-1/2" NPT (2) 1" NPT 120 lbs. 116 fl.oz. Cast Iron

BP6150

Volume: Discharge Pressure: Speed: Inlet Pressure: Power Consumption: Plunger Diameter: Plunger Stroke: Crankshaft Diameter: Key Width: Shaft Rotation: Temperature of Pumped Fluids: Inlet Ports: Discharge Ports: Weight: Crankcase Oil Capacity: Fluid End Material:

Up to 42.3 GPM Up to 1500 PSI Up to 600 RPM -4.35* -150PSI 43.8 HP 50mm 48mm 45mm 12mm Either side Up to 104 oF (2) 2-1/2" NPT (2) 1-1/4" NPT 275.5 lbs. 1.1 Gal. Cast Iron

BP7170

Volume: Discharge Pressure: Speed: Inlet Pressure: Power Consumption: Plunger Diameter: Plunger Stroke: Crankshaft Diameter: Key Width: Shaft Rotation: Temperature of Pumped Fluids: Inlet Ports: Discharge Ports: Weight: Crankcase Oil Capacity: Fluid End Material:

Up to 84.5 GPM Up to 1015 PSI Up to 560 RPM -4.35* -150PSI 59 HP 70 mm 52 mm 48 mm 14 mm Either side Up to 104 oF (2) 2-1/2" NPT (2) 1-1/4" NPT 423 lbs. 1.1 Gal. Cast Iron