|
Submersion installations into tanks are one
of the most common installation methods. Enjoy the benefits of our
flat surface design by mounting the electrode in flow or agitation
within the tank.
|
Submersion measurements
in tanks, flumes, and sewer lines are the most common type of mounting
arrangement for pH measurement. They can conveniently be made
using the Sensorex Submersion system.
It
is especially well suited for applications with high suspended solids
or where flocculation operations require low velocities. It is also
useful for coating problems in tanks which have high agitation.
Where
only low velocities are present and coating is a problem, the electrode
can be mounted at a 45 degree angle facing into the flow.
This will provide enhanced scrubbing action across the measuring
surface, keeping the surface cleaner, longer.
If electrode coatings continue to be a problem, it may be necessary to install a small circuiting pump and use the Side Stream unit to achieve the needed Self Cleaning action.
|
| Product Features |
| Flat Surface |
Self Cleaning Design |
| Cartridge Style |
Easy to install +
Remove |
| Special Versions |
Solve many Problems |
| Universal |
Replace any Brand |
|
|
|
Our cartridge style
makes installation and removal of the electrodes a breeze.
The
pH electrode cartridge has a BNC type connector and a pair of O-rings
fitted into the top end. Simply plug the electrode in to the
Cap Cable, and you are done! The O-rings provide a watertight
seal, even under the most demanding conditions.
To order:
Select pH electrode part number S650CD and a cap cable assembly.
Submersion Installation Components
| S650CD |
pH Electrode |
Cartridge Style, Flat Surface, self cleaning |
| S653-L-EC* |
Cable Assembly |
Standard Use, without ATC.* |
| S653-TC-#-L-EC* |
Cable Assembly |
Use for
Automatic Temperature Compensation
,
specify
L, EC and #
(ATC
element) required for your controller.*
|
*Specify L in feet, and
EC the end connections required
Purchase the cap cable
assembly one time only! When it is time to replace the electrode,
pay only for the replacement electrode, not for any special preamplifiers,
and not for the special ATC element. Sensorex offers this
cost benefit to save you money!
The
standard cap cable assembly is part number S653-L-EC.
This is complete with a 1/2" male NPT connection on the end
closer to your controller. Simply thread this into a 1/2"
female coupling on the end of your submersion pipe. Specify
the "L" in feet on your order, and also specify the "EC"
(End Connection) ...ie a "BNC" for example.
A
typical complete part number will look like....."S653-20-BNC"
If
Automatic Temperature Compensation is required, it can be included
in the Cap Cable assembly. Specify the cable assembly with
ATC as....S653TC-#-L-EC-EC. Specify "#" as the necessary
temperature compensator required by your model meter. Specify
"L" in feet, and specify "EC", the end connection
that you require.
A
typical complete part number WITH ATC will look like....."S653TC-10k-20-BNC-TL"
(a
10,000 ohm thermistor for your meter, 20' of cable, a BNC connector
for the pH-REF, and Tinned Leads for the TC wires)
Sensorex offers many special submersion electrodes
to meet specific requirements. We offer a special electrode
for ground loop applications, one for HF resistance, another for
high temperature and severe chemical attack and still another for
low ionic applications. All of these special part number will
utilize the standard Cap Cable assemblies.
|
