Stainless Steel Conductivity Sensors From Sensorex

>Boiler Conductivity Sensors 316 SS Construction

Sensorex boiler conductivity sensors use 3/4" male NPT threads, and both the body and the measuring pin are constructed of 316 stainless steel.  They feature a special thermally resistant PEEK insert and high temperature "O" rings.  Two models are available, and each model may be ordered with or without ATC elements depending upon your application requirements.   The CS675HT and CS675HTTC  feature a 1" insertion depth beyond the 3/4" MNPT threads. The models CS676HT and CS675HTTC provide 3" insertion depth past the 3/4" MNPT threads. All boiler probes are supplied with 6" Teflon coated leads for Junction Box connection and extension. Cell K value of 1.0 is standard.  Longer cable lengths can be supplied at additional cost.

.

>General Use 316 SS 3/4" and 1/2" Sensors

Models CS675, CS676 and CS650 are designed for general use conductivity measurements. The CS675  and CS676 features 3/4" MNPT threads and the CS650 incorporates 1/2" MNPT threads. Pins and body are 316-SS construction. Standard cell K values are 0.1, 1.0 and 10.

.

>High Pressure Conductivity 316 SS 3/4" & 1/2"

Models CS675HP, CS676HP and CS650HP are designed to withstand upto 300 psig.  The CS675HP  and CS676HP features 3/4" MNPT threads and the CS650HP incorporates 1/2" MNPT threads. Pins and body are 316-SS construction. Standard cell K values are 0.1, 1.0 and 10.

Special cell K values such as 0.01 and 10 and others are available in quantity orders. Special packaging and design are also available.  Contact Sensorex to discuss your specific conductivity measurement requirements.