|
Several accessories are available for your ORP measuring requirements.
|
ORP Calibration Solution Kits
The performance of an ORP electrode can be determined by
use of the ORP Calibration Kit Model B125. Use the kit for pH calibration, then
convert the pH buffers into stable ORP buffers. Solution values after mixing are
90mV and 260mV.
Zobel Calibration Solution is a pre-mixed solution of 228mV.
Lights Calibration Solution is a pre-mixed solution of 450mV.
|
| Product Features |
| Calibration Kits |
| Calibration Solutions |
| Simulators |
| Transmitters |
| Preamplifiers |
|
|
|
ORP Simulator
The C110 simulator incorporates a + and - 700 mV resistor for verifying ORP circuits in addition to simulating 4, 7 and 10 pH. This is an extremely useful tool to verify cable and instrument operational status during troubleshooting.
ORP Transmitters
The ORPMA blind 2-wire 4-20mA transmitter provides a low cost solution for converting the signal from an ORP electrode into a 4-20mA output. Ideal for direct input into PLC and other 4-20mA input devices.
ORP Preamplifiers
The economical Sensorex PHAMP-1 is a battery powered in-line design. It is designed to boost the signal and lower the impedance from a ORP electrode to a pH monitor, controller or transmitter.
|
