ORP Tester BNC from Oakton Instruments

Back to pH Testrs

ORP Tester BNC

Use with any ORP electrode to meet specific application needs.

	Push-button ±150 mV offset adjustment- no screwdriver necessary
	Hold function; Auto-off; Error messages
	Use the ORPTestr BNC with any ORP electrode with BNC connector

The microprocessor-based OAKTON ORPTestr BNC is ideal for instant, repeatable mV ORP (Redox) checks using ORP electrodes selected for the application needs. Push-button calibration lets you standardize your tester in calibration solutions, or make it agree with an established work standard.

The ORPTestr BNC features a BNC connector for repeated use with a wide variety of ORP electrodes. This allows you to reuse the Testr body many times over, which saves you money over time.

Click below to download Acrobat (.pdf) file of:
ORPTestr BNC product bulletin
ORPTestr BNC manual
Tech Tip: Introduction to ORP
Tech Tip: Conditioning ORPTestr for Maximum Response
Tech Tip: Calibrating ORP Measurement Systems

Range	-50 to +1050 mV
Resolution	5 mV
Accuracy	±5 mV
Calibration	Offset up to ±150 mV
Electrode	Use with any ORP electrode with BNC connector
Operating Temperature	32 to 122°F (0 to 50°C)
Power	Three 1.5 V batteries
Battery life	55 hours continuous use
Dimensions	5.9" x 1.5" x 0.8" (15 x 4 x 2.5 cm)
Shipping weight	4.5 oz (125 g)