• Operating range from 10°F (-12°C) to 600°F (315°C)
• Food grade (NSF registered, FDA certified Non-Toxic, USDA Chemicallyacceptable, Kosher certified)
• Low viscosity / Low pour point
• Non-Toxic, Non-Hazardous, Non-Fouling
• Designed for applications in Food, Chemical, Plastics, and Die-Casting
• Thermal expansion coefficient 0.00035/ÁF (0.00063/ÁC)
• For use in closed loop, liquid phase heating and cooling systems to 600°F

• MultiTherm's oxidation grade fluid for open or closed loop systems
• Operating range from 10°F (-12°C) to 550°F (290°C)
• Highly refined to have High flash point
• Oxidation resistant - Very Low vapor pressure
• Non-Toxic, Non-Hazardous
• Designed for applications where the hot heat transfer fluid comes in contact with atmosphere
• Thermal expansion coefficient 0.00056/ÁF (0.00102/ÁC)

• When you have heating and cooling in the same loop
• Operation range: from 50°F (-10°C) to 500°F (260°C)
• Meets FDA specifications but not certified
• Very low viscosity - Very low pour point - Low vapor pressure
• Relatively high flash point - Non-Toxic, Non-Hazardous
• Designed for applications in Plastics, Chemical, and other processing industries
• Thermal expansion coefficient 0.00051/ÁF (0.00092/ÁC)
• For use in closed loop, liquid phase heating and cooling systems from 10°F to 500°F

• Operating range from 10°F (-12°C) to 600°F (315°C)
• Highly refined to have High flash point
• Oxidation resistance - Very Low vapor pressure
• Non-Toxic, Non-Hazardous
• Designed for applications in Asphalt, Chemical, Plastics, Laundries and Die-Casting
• Thermal expansion coefficient 0.00054/ÁF (0.00097/ÁC)
• For use in closed loop, liquid phase heating systems up to 600°F
• MultiTherm IG-4 is an upgrade of, and a direct replacement for MultiTherm IG-2®

• Operating range from 10°F (-12°C) to 550°F (288°C)
• Economical heat transfer fluid
• High flash point
• Non-Toxic, Non-Hazardous
• Designed for applications in Asphalt, Roofing, Paper, Particle Board and Die-Casting
• Thermal expansion coefficient 0.00054/ÁF (0.00098/ÁC)

• For ultra low temperature applications
• Operation range down to -170°F (-112°C)
• Low freezing point - Low viscosity at ultra-low temperatures
• Thermally stable & biodegradable
• Single fluid usage for sterilization applications
• Designed for Pharmaceutical, Chemical, Freeze-Drying, and Cryogenic applications
• Extends low-end operating ranges far beyond the boundaries of most competitive brands
• Remains pumpable even at temperatures below -170°F (-112°C)

• For mid to low temperature range applications
• Operation range down to -112°F (-80°C)
• High flash point - Non-Toxic
• Designed for Food & Beverage, Pharmaceutical, and refrigeration applications
• Used when heat transfer fluid requirements demand both low toxicity and an elevated flash point

• Aqueous-based for Low temperature applications
• Operation range down to -58°F (-50°C)
• Non-toxic, None-flammable
• Designed for Ice Rink, Food, Refrigeration, Breweries/Distilleries, and HVAC applications
• Engineered to deliver the desirable low-end temperature performance of synthetic organic and silicone-based fluids

• Specially formulated flushing fluid to clean out systems during:
  • Start-ups - to remove loose material such as weld splatter, fines, particulate matter, etc. left in lines and equipment, along with oil and some preservative coatings
  • General Maintenance - for removing particulate matter and used heat transfer fluid from a system prior to recharge or changeover from one fluid to another.
• Compatible with all MultiTherm and mineral oil heat transfer fluids.
• Thermal expansion coefficient 0.00047/ÁF (0.00085/ÁC)

HVAC/Industrial Coils

Replacement or New

Chilled Water, Hot Water, Steam, DX or Condenser

Heavy duty industrial coils of all types

• Duplicate existing dimensions and performance
• Special 5 work day and 10 work day quick shipments available
• Hot water duct booster coils in stock
• Call 800-225-7440 for immediate pricing, technical information and delivery information

T-Bar Unit Self Contained AC Unit

A T-Bar Unit from Multitherm is the answer to your special cooling and dehumidification needs. And, it fits right into a standard 2' x 4' suspended ceiling panel, with no floor space needed.