|
The Jesco Model
600 Series Poly-Matic Dispensers are pneumatically
powered, fixed ratio, double acting, positive
piston displacement metering systems. They can
meter, mix and dispense low viscosity / level
seeking materials that are gravity fed to their
inlet ports.
Model 600 Series Poly-Matic Dispensers can provide
a continuous flow of mixed material upon command.
They include 2 double acting metering cylinders
that are sized for the volumetric ratio required.
Both meters are reciprocated together by a common
automatically reversing air cylinder.
Model 600 Series Poly-Matic Dispensers are available
in 2 basic versions. The Model 601 Series units
are designed for use with static mixers, whereas
the Model 602 Series units utilize dynamic mixers.
All Model 600 Series Poly-Matic Dispensers can
be configured with a volumetric ratio in the
range of 1:1 to 20:1. Standard Model 600 Series
Poly-Matic Dispensers can deliver up to 17.7
in3 of material per cycle at a 1:1 volumetric
ratio with an 11.1:1 power ratio. High Output
versions of the Model 600 Series Poly-Matic
Dispensers are also available. These “HO”
units can deliver up to 39.7 in3 of material
per cycle at a 1:1 volumetric ratio with a 12.6:1
power ratio.
Many options are available to customize the
features of Model 600 Series Dispensers to suit
the requirements of a specific application.
Some of the options available to the Model 600
Series Dispensers are as follows:
- Two
Component Mix Guns
- Various
sizes, lengths and types of static mixers
for the Model 601 Series units, including
plastic disposable static mixers and mixer
shrouds
- Time
Lapse Warning Controls
- Automatic
Mixed Material Purge Controls
- Mixer
Solvent Flush Packages
- Various
Material Feed Systems, including gravity feed
totes, pressure pots, etc.
- Special
meter provisions for dispensing heavier, low
pressure fed materials
|
