|
The N-3685 Dispenser
is designed to meter up to 4 low viscosity pourable
materials at up to 14 predetermined and selectable
formulas / recipes. This dispenser is an ideal
piece of equipment for a Model or Mold Shop
requiring several different blends of a multi-component
material mixture.
The dispenser is basically comprised of 4 metering
units mounted on a common frame with a PLC control
panel. Each metering unit is basically comprised
of the following:
- Permanent
Magnet DC Motor
- Electromechanical
Brake
- Worm
Gear Speed Reducer
- Metering
Pump
- Pump
Position Pulse Wheel and Sensor
Any of the 14
Formulas can be dispensed by entering the Formula
Number via a thumbwheel and starting the dispense
cycle. The system will dispense up to 4 components
of material (according to the formula), in succession
and to the appropriate percentages, for a total
batch volume of 4 _ Gallons. Each metering unit
will dispense its percentage of the total batch
within +/- 0.5 %.
The system also includes 4 one component formulas
that can be used to initially set-up the system
and verify the volumetric output calibration
of the individual metering units.
|
