The CR5210/5220 Series, DC Hall Effect Current Transducers are designed to output a DC signal which is proportional to a DC current input signal. These devices are designed for direct current only, targeting them towards general and daily applications.

Non-contact DC current sensing Closed loop sensing for accuracy 0 - 5 Vdc or 4 - 20 mA DC outputs Connection diagram printed on case DIN rail or panel	Thermal Drift: 500 PPM/C Calibration: RMS 4-20 mA DC - 0-300 ohm Output Operating Temperature: 0°C to +50°C Response Time: 250 ms Insulation Voltage: 2500 VDC MTBF: Greater than 100 K hours Supply Voltage: 24 VDC Frequency Range: DC Output Load: 0-5 VDC - 2 K or greater Basic Accuracy: 1.0 %	Power supply management DC motor drives Battery chargers and systems Mobile applications