 Deming Vertical Process pumps are space saving, always primed, with cantilever shaft, no submerged bearings, and broad capacity range.
Heads To: 150 feet
Flows To: 3,600 g.p.m.
|
Models:
|
Series 4310-11, Series 5560
|
|
Flows To:
|
500 g.p.m (Series 4310-11),
3,600 g.p.m (Series 5560)
|
|
Heads To:
|
100 feet (Series 4310-11),
150 feet (Series 5560)
|
|
Discharge:
|
1 -3 inches (Series 4310-11),
1 -10 inches (Series 5560)
|
|
HP:
|
.25 - 7.5 (Series 4310-11),
1 - 75 (Series 5560)
|
|
RPM:
|
1150 or 1750
|
|
Applications:
|
Coolants Metal and Parts Washing Filtering Air Conditioning Pickling Circulation Paint Systems Plating Air Washers Pollution Control
|
|
Features:
|
Casing - Vertically split, end suction design. Double volute type on pumps with 3” and larger discharge.
Impeller - Series 5560 pumps have semi-open type impeller with heavy vanes for outstanding performance. Back pump-out vanes on a semi-open impeller reduces pressure behind the impeller and limits axial thrust.
Power Frame - Heavy duty, one piece cast iron, precision bored and machined to assure alignment of the rotating assembly. Series 43 10-11 pumps are short set design. Series 5560 are available in 9”, 1 2”, and 1 5” extension lengths below the support plate.
Shaft - High strength shaft is extra heavy for maximum loads with minimum deflection. Impeller is keyed to shaft and locked with impeller nut or large cap screw.
|
Download Deming Vertical Process Pumps Brochure |
