Bubbler Kits for TUF Pump

• Outflow orifice maintains correct flow for
  application, minimizing back pressure
• Bleed orifice relieves excess pump head
  pressure. It increases airflow through the
  pump to assist cooling
• 1/8" x 1/8" barbed check valve prevents
  liquid from backing up tubing during
  power outages

• Filter keeps contaminants from entering air supply
• 1/8" x 1/8" barbed air intake filter
• Two 1/8" x 1/8" x 1/8 " barbed tees
• Four 1/8" barb to 1/8" NPT connectors and
  two 1/8" barb to 1/4"NPT connectors
• 15ft of 1/8"ID x 1/4"OD
  polyurethane tubing

Download Catalog Sheet
in PDF Format

The Ingram bubbler kits are designed for Ingram TUF pumps to be used in bubbler type liquid level control applications. They must always be used in conjunction with the pump to prevent excessive back pressure and heat from developing that can shorten pump life. The BK-10 kit will maintain approximately 5 to 6 psi pressure for 0-10ft deep liquid reservoirs. The BK-20 will maintain 10 to11 psi for 0-20ft systems and the BK-30 will provide 14 to15 psi for 0-30ft systems.